بلوئر صنعتی   ( کمپرسور دمنده)  Blower Compressor

    مدل             Model توان مصرفی 

Motor power

kw

  ظرفیت هوادهی F.A.D 

 M³/min

 اختلاف فشار  

   Pressure  

 mbar

        طول   

    L 

   عرض

  W

  ارتفاع       Hوزن   

Weight

 kg

بلوئر صنعتی CST B-3S/DN50۱٫۵˷۱۱۰٫۵۸˷۴٫۱۲۳۰۰˷۹۰۰۱۰۸۵۸۰۰۱۲۰۰۲۸۵
بلوئر صنعتی CST B-4S/DN50۲٫۲˷۱۱۰٫۷۹˷۴٫۲۳۰۰˷۹۰۰۱۰۸۵۸۰۰۱۲۰۰۳۰۰
بلوئر صنعتی CST B-4S/DN80۵٫۵˷۱۵۴٫۱۵˷۵٫۷۱۳۰۰˷۱۰۰۰۱۴۱۷۱۰۰۰۱۳۵۰۳۸۳
بلوئر صنعتی CST B-7L/DN80۲٫۲˷۱۵۱٫۲۴˷۸٫۵۹۳۰۰˷۷۰۰۱۴۱۷۱۰۰۰۱۳۵۰۳۸۸
بلوئر صنعتی CST B-10S/DN80۳˷۲۲۲٫۱۳˷۹٫۰۹۳۰۰˷۱۰۰۰۱۴۱۷۱۰۰۰۱۳۵۰۴۱۲
بلوئر صنعتی CST B-10S/DN100۱۱˷۳۰۸٫۹۵˷۱۲٫۱۳۰۰˷۱۰۰۰۱۶۱۶۱۲۵۰۱۵۷۰۵۲۰
بلوئر صنعتی CST B-15L/DN100۴˷۳۰۳٫۲۳˷۱۷٫۹۳۰۰˷۷۰۰۱۶۱۶۱۲۵۰۱۵۷۰۵۳۵
بلوئر صنعتی CST B-25S/DN100۵٫۵˷۵۵۵٫۰۵˷۲۱۳۰۰˷۱۰۰۰۱۶۱۶۱۲۵۰۱۵۷۰۵۹۰
بلوئر صنعتی CST B-25S/DN150۲۲˷۵۵۲۲٫۵˷۲۳٫۸۳۰۰˷۱۰۰۰۱۷۹۶۱۵۰۰۱۹۰۰۱۰۵۰
بلوئر صنعتی CST B-30L/DN150۷٫۵˷۷۵۷٫۳۴˷۳۵٫۴۳۰۰˷۷۰۰۱۷۹۶۱۵۰۰۱۹۰۰۱۰۹۵
بلوئر صنعتی CST B-35S/DN150۱۱˷۹۰۱۱٫۷˷۴۰٫۳۳۰۰˷۱۰۰۰۱۷۹۶۱۵۰۰۱۹۰۰۱۱۵۵
بلوئر صنعتی CST B-50L/DN150۱۵˷۷۵۱۷٫۷˷۴۳٫۵۳۰۰˷۷۰۰۱۷۹۶۱۵۰۰۱۹۰۰۱۲۳۵
بلوئر صنعتی CST B-50L/DN200۳۷˷۹۰۴۷٫۳˷۵۵٫۴۳۰۰˷۷۰۰۲۳۱۰۱۶۰۰۲۲۰۰۱۹۱۰
بلوئر صنعتی CST B-60S/DN200۱۵˷۱۳۲۱۳٫۳˷۵۹٫۴۳۰۰˷۱۰۰۰۲۳۱۰۱۶۰۰۲۲۰۰۲۰۳۰
بلوئر صنعتی CST B-80L/DN250۱۸٫۵˷۱۶۰۱۹٫۳˷۸۵٫۲۳۰۰˷۷۰۰۲۳۱۵۱۶۰۰۲۲۰۰۲۱۰۰
بلوئر صنعتی CST B-90S/DN250۳۰˷۲۰۰۲۹٫۱˷۹۰٫۳۳۰۰˷۱۰۰۰۲۳۱۵۱۶۰۰۲۲۰۰۲۲۴۰
بلوئر صنعتی CST B-130L/DN300۳۷˷۲۰۰۴۳٫۵˷۱۳۴۳۰۰˷۶۰۰۲۸۲۲۲۱۰۰۲۷۴۰۳۶۱۵
بلوئر صنعتی CST B-150S/DN300۵۵˷۳۵۵۶۸٫۴˷۱۵۲۳۰۰˷۱۰۰۰۲۸۲۲۲۱۰۰۲۷۴۰۳۸۶۰

مشخصات فوق در دمای ۲۰درجه سیلسیوس و فشار ۱ بار می باشد              Performance data based on the intake of air 1 bar , 20°C

انواع بلوئر های صنعتی

بلوئر (Blower)

کمپرسورهای جابجایی مثبت بطور گسترده ای در صنایع آرد، سیمان، آب و فاضلاب و بسته بندی مورد استفاده قرار می گیرند. این سیستم ها بطور معمول توانایی تولید اختلاف فشار تا حد ۱۰۰۰ میلی بار و حجم هوادهی تا حد ۱۵۰۰۰ متر مکعب بر ساعت را دارا می باشند. تذکر این نکته لازم است هوای خروجی از کمپرسورهای فوق فاقد روغن می باشد.

شرکت پارس بلوئر در خصوص تولید انواع بلوئرهای جابه جایی مثبت، توربو بلوئرها و سیستم های وکیوم با شرکت های معتبری چون کمپانی Aerzen آلمان اقدام به همکاری نموده است.

انواع بلوئر صنعتی در صنایع مربوط به تسویه آب و فاضلاب و کشتارگاههای صنعتی ،پرورش آبزیان ،آبکاری صنعتی ،انتقال پودر ، نقل و انتقال دانه ها و غلات،صنایع کاغذ سازی، صنایع غذایی و صنایع شیمیایی کاربرد دارند.

دراین مجموعه صنعتی (تعمیراتی) اورهال و تعمیرات انواع کمپرسورهای اسکرو از هر برند و باهر دبی کاری و همچنین اورهال و تعمیرات تخصصی انواع بلوئرهای صنعتی(روتس) در حال انجام میباشد و سفارشات شما مشتری گرامی در اسرع وقت و با مناسبترین قیمت تمام شده و با ضمانت و گارانتی تعمیرات انجام و تحویل خواهد شد.

بلوئر هوا

بلوئر هوا یا دمنده دستگاهی است که در انواع مختلف جابجایی مثبت و دوار وجود دارد که برای انتقال هوا و گاز از طریق روش های مختلف استفاده میشود .

معمولا در نسخه های تک مرحله ای Single – Stage  و چند مرحله ای Multi- Stage  میباشند

این سیستم ها بطور معمول توانایی تولید اختلاف فشار تا حدود ۱۰۰۰ میلی بار و حجم هوادهی ۱۵۰۰۰ متر مکعب بر ساعت را دارا میباشند .

از معروف ترین برند هواساز  Aerzen  ساخت آلمان ، که در ظرفیت های ۰٫۵ مترمکعب در دقیقه تا ظرفیت ۲۴۶ مترمکعب بر دقیقه میباشد .

توضیح اینکه هوای خروجی از کمپرسورهای فوق فاقد روغن میباشند

ROOTS BLOWER APPLICATION IN INDUSTRY AND INDUSTRIAL PROCESSES SUCH AS PNEUMATIC CONVEYING

Roots blower application occurs in numerous industries and industrial processes including pneumatic conveying. Roots blowers play a vital role in many manufacturing and processing systems. Roots blowers are technically referred to as ‘positive displacement rotary air blowers’ and are commonly known as ‘blowers.’

WHAT DOES A ROOTS BLOWER DO?

Roots blowers are used to generate constant airflows that are independent of discharge pressure conditions. Root blower applications are limited to low and medium pressure and vacuum processes and can be used to provide small to large airflow rates.

HOW DOES A ROOTS BLOWER WORKS?

Roots blowers consist of two identical and symmetrical rotors that have two or three meshing lobes inside an airtight case. The case is valveless and has inlet and outlet ports that are generally on opposite sides. The rotors counter-rotate and are synchronized using a set of gear wheels. Air is displaced from the inlet to the outlet by the motion of the meshing lobes on the counter-rotating rotors. The rate of airflow from the displacement is governed primarily by the rotational speed of the rotors within the roots blower. There is no change to air volume within the roots blower, so no air compression takes place. Roots blowers are generally air-cooled and some models operate without the need for oil as a lubricant (oil-free).

How a roots blower works

Read up on how to choose the right roots blowers or how to increase roots blower efficiency.

WHAT INDUSTRIES HAVE ROOTS BLOWER APPLICATIONS?

Roots blowers are essential in many bulk material handling and dust collection systems that involve:

Pneumatic conveying

Industrial vacuum cleaning

Dust filtering

They have a wide range of industry applications including:

Agriculture

Bricks

Clothing

Cement

Chemical

Environmental

Food processing

Glass and ceramics

Marine

Mining

Packaging

Paper

Petroleum

Pharmaceutical

Plastics

Power generation

Textile

Water treatment

CEMENT INDUSTRY

Raw meal, cement, kiln dust, limestone and coal powder are pneumatic conveyed using roots blowers. They are used to blend raw meal, aerate raw meal and cement and blow air into kilns and burners for combustion. Many cement plants generate their own power using a coal-fired power station. Refer to the power generation section to see how roots blowers are applied in that industry.

CHEMICAL AND PETROLEUM INDUSTRY

Roots blowers are used to transport or compress many inert, corrosive and explosive gases in chemical plants and refineries. These include gases such as nitrogen, hydrogen, chlorine, and various combinations of hydrocarbon gases. Roots blowers are used in regenerative drying systems to provide ultra-clean and dry air. Bulk dry raw materials, such as aluminum oxide, are pneumatic conveyed using roots blowers on gantry ship unloaders and barges. They are used in pressure and vacuum modes in fixed and portable systems.

ENVIRONMENTAL INDUSTRY

WASTEWATER TREATMENT

Roots blowers are used to aerate raw sewage and industrial organic waste. The aeration drives the digestion of the waste by microorganisms. Roots blowers are also used for grit tank cleaning, filter flushing, backwashing and the recovery of gases. Oil-free roots blowers are used for deep cell aeration.

BIOGAS RECOVERY AND RECIRCULATION

Biogas is referred to as ‘digester’ or ‘landfill’ gas. It is made up of methane with small amounts of hydrogen sulfide and other trace gases. Biogas, which is explosive and corrosive, is generated in wastewater treatment plants. Roots blowers are used to transport biogas to where it is burned off or recirculated to fuel combustion engine-driven machines.

SOIL REMEDIATION

Remediation of soil is done when cleaning up accidental spills from vehicles transporting petroleum products and industrial solvents, or leaks from fuel storage tanks. It involves the extraction of volatile organic compounds such as hydrocarbons and solvents. A combination of pressure and vacuum systems is used to evaporate these volatile organic compounds by moving large quantities of air through the contaminated soil. The contaminated air is then processed to remove the hydrocarbons and solvents and allow safe and immediate exhausting into the atmosphere.

DRINKING WATER PURIFICATION

Oil-free roots blowers are used to provide air for ozone production and filter flushing in drinking water purification systems.

FOOD PROCESSING AND PHARMACEUTICAL INDUSTRIES

Oil-free roots blowers are used to supply air to many food processing and pharmaceutical manufacturing processes. Note that beverages and poultry are included in food processing. Vacuum and pressure pneumatic conveying is used to transfer powder and granular materials such as flour, salt, sugar, grain, spices, chocolate and milk powder for food processing. Dry bulk chemicals are similarly conveyed in the production of many pharmaceuticals. Roots blowers are used to supply vacuum equipment that operates packaging machines. It is common for food and pharmaceutical plants to have large wastewater treatment systems used to decontaminate processed water and treat organic waste. Refer to the environmental section to see how roots blowers are applied in that industry.

MARINE INDUSTRY

Roots blowers are used in marine diesel engine supercharging. They are also used to provide an air supply to bubbler systems on icebreaker and other Arctic duty vessels. They pump inert gas for fuel tank blanketing in tanker ships, and power emergency steering and braking systems on ships. Roots blowers are used to load and unload dry bulk material ships and barges with pneumatic conveying systems.  Cruise ships and military craft with large numbers of passengers or crew operating on board have the aeration process within wastewater treatment systems powered by roots blowers. Marinas, locks and harbors use roots blowers to drive air bubbler systems to ensure equipment will operate at sub-zero temperatures.

MINING INDUSTRY

Roots blowers are extensively used in the mining of most minerals, including copper, nickel, gold and diamonds. They are used to pneumatic convey dry bulk materials and provide air for oxidation processes and other refining applications. Roots blowers are used to filter and dry slurry and power high capacity vacuum pumps. Many mines have large wastewater treatment facilities to allow for the decontamination of processed water, a process requiring roots blowers for aeration.

POWER GENERATION INDUSTRY

Roots blowers are used for material handling and pollution control processes throughout the power generation industry. They are used to pneumatic convey fly-ash and lime in both vacuum and pressure modes and are an important part of flue gas desulphurization (oxidation). Roots blowers are used to transfer various bulk dry materials to and from trucks, railway cars, storage silos and hoppers.

Roots blower application occur in many industries and industrial processes

PRESSURE APPLICATIONS OF ROOTS BLOWERS

There are many industrial pressure roots blower applications, from assisting in combustion by pumping air or gas into burners, furnaces and forges to pressurizing paper mill head boxes. The following are some typical examples:

COMBUSTION

Used in the following industries:

Bakeries

Bricks

Chemical

Food processing

Glass and ceramics

Metal refining

Applied to equipment such as:

Asphalt, oil, and tar heaters

On-road machinery

Ovens and kilns

Pipe and wrapping machines

Smelters and foundries

DRYING AND DEHYDRATION

Used in the following process:

Air and sandblasting

Blending and mixing

Cake blowing

Dust blowing

Dusting and spraying

Grain conditioning in elevator storage

Sand filter regeneration

Supercharging

Washing, drying and cleaning drums

AERATING AND AGITATING LIQUIDS

Used in the following process:

Asphalt refining

Blending vinegars

Chemical processes

Electrotyping and engraving

Flotation

Fish ponds and lakes

Food washing

Ice manufacture

Ice formation prevention

Oyster washing

Waste treatment

PNEUMATIC CONVEYING

Used in transporting the following materials:

Granular

Flour and powder

Fluidizing

Liquids

Pulp

Rock dusting

Wood and metal chip

VACUUM APPLICATIONS OF ROOTS BLOWERS

Roots blowers are frequently used as vacuum pumps. As a result, industrial vacuum roots blower applications are widespread and include the following:

Bottle and tube filling machines

Dust collecting

Drying

Garment presses

Industrial and commercial vacuum cleaning

Mechanical mat formers

Paper folding machinery

Pump priming

CONTACT US FOR ANY QUESTIONS

Pneuvay Engineering has more than 30 years of industry experience in using roots blowers within pneumatic conveying, vacuum transfer and dust control systems in Australia and around the globe. Contact us if you need assistance or have some questions regarding roots blowers within these systems.